* Refuse duplicate peer IPs
* Explicitly mentioning NAT in code comment
* Well of course that would mess with tests. Only trigger using IP test when on the wild internet (~DNS seeding).
* Break out of main peer loop on error
* Force client conn shutdown on error
* Fix borrow error
* Ban peers that fail handshake
* Fix add_peer for ban, remove useless disconnect
* shutdown the tcpstream when peer connect or accept fail
* remove the unnecessary 3 times retry on peer connecting
* connect/accept are actually handshakings instead of tcpstream connect/accept
* Fix secondary scaling bugs; rename is_testnet -> is_floonet (#2215)
* add global::is_mainnet()
* use it to change pre-genesis pow type
* rename is_testnet -> is_floonet
* Support multiple chain configurations (#2217)
* Support multiple chain configurations
Supports generating the proper configuration for each chain type
(mainnet, floonet, usernet). Will run them by default under
their respective root directory (~/.grin/main, ~/.grin/floo, etc).
Assigned default ports for mainnet, overriding them to keep Floonet
ports unchanged.
For now, starting on mainnet will abort.
* Fixed usernet command line help message. Fixes#2217
* Differing magic numbers for each chain type (#2208)
* stick to e=H(R|P|m) when use schnorr signature (#2200)
* stick to e=H(R|P|m) when use schnorr signature
* (1)add verify_slate_messages for wallet receive (2)log the message content
* remove debug log on verify_slate_messages
* verify the sender's message signature when receive_tx in wallet listen
* Revert "remove debug log on verify_slate_messages"
This reverts commit 65ea32a407.
* Revert "rustfmt"
This reverts commit c380ab9185.
* Revert "(1)add verify_slate_messages for wallet receive (2)log the message content"
This reverts commit 9584ca7a89.
* [re-floonet] Keychain Floonet BIP32 version/network option (#2235)
* add 'is_floonet' property to keychain
* fix hex encoding and tests
* Fix couple floonet loose ends (#2230)
* Fix couple floonet loose ends. Fixes#2216
* Doc fix for sig message
* Refuse unkown kernel features (#2244)
* Minor: magic number change for re-floonet
* Set pre genesis is_secondary to true (#2247)
* Minor: tx validation error display underlying
* New floonet genesis
* genesis rustfmt
* Use chain-specific config for wallet toml gen
* Fix default wallet_listener_url
* New more reasonable genesis block, bumped version
* genesis rustfmt
* Couple minor fixes to genesis generation script
* ban a peer with highest height but can't send us the proper headers
* reset self.stalling_ts if syncing goes well
* fix: switch to peers.ban_peer() instead of peer.set_banned()
* headers msg is now "streamed" off the tcp stream
* rustfmt
* cleanup
* move StreamingReader into ser.rs
extract read_exact out into util crate
* rustfmt
* do not treat txhashset.zip download as abusive behavior
* count times, not bytes so we exclude quiet increments
* use inc_quiet when tracking sent bytes via an attachment
* add comment
* fixup "quiet" counter entries
* rustfmt
* use FixedLength to define serialized size in bytes of various structs
replace usages of mem::size_of() with ::LEN so we correctly calculate serialized sizes in bytes
* rustfmt
* split horizon into two explicit values for cut through and txhashset request
* let node which has 2-7 days of history be able to handle forks larger than 2 days
* add test simulate_long_fork
* add pause/resume feature on p2p for tests
* refactor the state_sync
* ignore the test case simulate_long_fork for normal Travis-CI
* refactor function check_txhashset_needed to be shared with body_sync
* fix: state TxHashsetDone should allow header sync
* deserialize capabilities dropping unknown flag bits
* add tests for capabilities deserialization
* rustfmt
* FULL_NODE needs to be handled safely for legacy nodes
Fuzz test found that we don't read IPV6 addr (as part of p2p message)
properly. The code is supposed to read 8 dwords, but [0..8] is not a
slice of 8 ints, but a slice of one Range, so we always read just one
dword
* Update secp dependency to use crates.io version
* Add more details to various Cargo.toml
* Remove use of env variables that aren't reliably provided by cargo
* Initial expired peers removal
* Stop expired peers
* Simplify peer removal and remove only Defunct peers
* Make seed to check for expired peers every hour
* Get rid of unused vector of peers to remove
* Make peer deletion predicate closure immutable
* Replace logging backend to flexi-logger and add log rotation
* Changed flexi_logger to log4rs
* Disable logging level filtering in Root logger
* Support different logging levels for file and stdout
* Don't log messages from modules other than Grin-related
* Fix formatting
* Place backed up compressed log copies into log file directory
* Increase default log file size to 16 MiB
* Add comment to config file on log_max_size option
* Add peers used bandwidth calculation and display in TUI
* Fix formatting
* Change Mutex to RwLock from peer's used bandwidth statistics in Tracker
* Make used bandwidth column in TUI peers list sort by sum of bytes
* First pass at secondary proof of work difficulty adjustments
* Core and chain test fixes
* Next difficulty calc now needs a height. Scaling calculation fixes. Setting scaling on mined block.
* Change factor to u32 instead of u64.
* Cleanup structs used by next_difficulty
* Fix header size calc with u32 scaling
* fix: avoid a confusing log when fastsync start (#1720)
(cherry picked from commit 4f462cdfdc)
* small speed optimization for header sync (#1719)
(cherry picked from commit d3589d1bf5)
* get rid of RwLock around peer instances
* rustfmt
* rename stuff to live_info
* rustfmt
* serialize into PeerInfoDisplay
limit live_info write lock to peer_info.update()
rename to PeerLiveInfo
* simplify broadcast logic a bit more
connected peers are connected by definition
* return true/false on broadcast so we can send to more peers
* rustfmt
* fix p2p and server tests for PeerInfoDisplay
* commit
* Move Proof and Difficulty types to pow module. Difficulty scaling calculation.
* Diffculty scaling and size shift for 2nd PoW
* Backport e7eb26ee
* Test compilation fixes
* Scaling only need to go one way, as @tromp pointed out
Currently on startup we wait for 30 secs if we don't have at least 4 peers with more work. If a node was quickly restarted it is already fully synced so thereare no peers with more work at all. This pr assumes that if we've done some work already and we have enough peers but still 0 with more work we are fully synced and good to go.
* fix for unstable travis-ci test on servers module
* skip the PeerWithSelf connection request on sending side
* logs and comments change; and remove an unnecessary unwrap() in test
* improve: HeaderSync optimization (#1372)
* remove get_locator() optimization, which should be an independent pr for security review
* refactoring: move 'headers_streaming_body()' from Message to Protocol
* move 2 headers utils functions out of Protocol, and remove 'pub'
* support reading variable size of BlockHeader, from Cuckoo30 to Cuckoo36
* fix: use global::min_sizeshift() instead of hardcoded 30, because Cuckoo10 will be used for AutomatedTesting chain
* fix: should use global::proofsize() instead of hardcoded 42 when calculate serialized_size_of_header
* replace another 42 with global::proofsize()
* config file can now be generated by executable
* rustfmt
* remove now-unnecessary config defaults test
* set up paths and config file creation in user's home directory
* rustfmt
* remove default grin.toml
* add grin configuration command to spit out config file
* Split configuration into wallet and server
* rustfmt
* Restore logging to wallet configurations
* rustfmt
* Use internal hashmap for count and contains methods instead of relying on
connected_peers method which is expensive (creates vector from hashmap)
* Reduce number of `clone()`
* Refactor broadcast_xxx
* Transaction max weight expressed in terms of block weight
* Cleaned up max block sizes, so everything is in therms of weight
* Cleanup block max constants
* Rename verify_size -> verify_weight
* fix: in case txhashset validation fail, 'TxHashsetDownload' should retry (#1293)
And add 2 more fixes:
1. handle sending request failure of 'send_txhashset_request';
2. use a 10-mins timeout to handle noresponse failure, in case a peer ignore our txhashset request, or in case a peer fail to send a file for some reason.
* Remove Iron dependecy and update hyper to version 0.12 #876
* REMOVE ME
* Revert "REMOVE ME"
This reverts commit e9a976eee98a2d5a4dfae5d9e1e4f5ed640c05d3.
* Rebase and start updating libwallet
Libwallet doesn't compile yet.
* Wallet compiles
* Grin compiles
* No compilation errors in tests
* All tests pass
* Reeturn future from handler
* Refactoring
* Fix lifetime issue one more time
I have to force push to rollback all the work done in last 2 days
* Fix wallet send issue
* Clean up
* improve: time crate flagged as deprecated, switch to actively maintained chrono crate
* improve: complete the switching from deprecated time crate to chrono crate, for all the tests part
* improve: complete switching to chrono crate, for the left tests in 'chain' and 'wallet'
* Make grin.toml config optional. Mirror exisiting config parameters in grin.toml to source code, so binary can run without a config file. Add test for it.
* fixup! Make grin.toml config optional
* Migrate main node store to LMDB
In preparation to using LMDB as a wallet database, migrate the
node db. There's no point in having 2 key-value stores.
In addition LMDB provides a few advantages as a node db, namely a
much faster build (compared to RocksDb), lesser dependencies and
transactions.
* Migrated p2p store to lmdb, stuff compiles
* More fixes, chain tests starting to pass
* Fixed txhashset rollback messing with block save and general batch delimitation. Chain tests passing.
* rustfmt
* LMDB max map size of 10MB isn't really workable. Half TB seems reasonable.
* Fix wallet tests
* Rather crucial commit was missing
* rustfmt
* Fixing new merged tests following lmdb changes
* rustfmt
* * Make txhashset validation read-only on fast sync to avoid having
a really long open transaction.
* Fix deadlock in new block processing, batch should always be
created within a txhashset lock (when they interact).
* Comment about batch and txhashset interlacing
* Fix store tests to use batch
* Externalize wallet config and seed
* Converted direct read access to file outputs map to an iterator
* Cleaned up and simplified wallet Backend trait:
* No more direct mutable access to internal structures (HashMap)
* Batch interface for all writes
* Remove unneeded read wrapper (read_wallet)
* rustfmt
* First (incomplete) pass at wallet LMDB backend
* Progressing on lmdb backent iml
* Added batch impl for LMDB wallet backend. Pretty much done with it, but not sure how to deal with commit (owned).
* rustfmt
* Wrapping LMDB batch around a refcell to work around borrow rules
* Compilation up to grin chain
* Add kernel commitments sum and kernel and output MMR sizes to block header
* Sum a block without including previous sums, cleanup. Blocks are now summed and validated based on their own totals and not the totals since genesis. This allows to get rid of BlockSum and simplified the setting of a new block's roots, kernel sum and MMR sizes. Fixes#116
* Additional kernel MMR validation to check all prior header roots successively
* Wallet tests fix
* First pass at restructuring the keychain crate and introducing a Keychain trait
* Parameterized everything that had to. Stuff compiles.
* More stuff compiles, fix most tests
* Big merge, pushing down opening the keychain forced adding factory methods on trait
* Test fixes for pool and servers crate
Small refactoring of one folder, if it makes sense I could extend the scope.
* Remove some cloning (real and just verbosity in the code)
* Naming conventions like to/into*
* Some Clippy's suggestions
I found that we don't use field init shorthand syntax, so I didn't touch this part, was it discussed before?
* verify a tx like we verify a block (experimental)
* first minimal_pool test up and running but not testing what we need to
* rework tx_pool validation to use txhashset extension
* minimal tx pool wired up but rough
* works locally (rough statew though)
delete "legacy" pool and graph code
* rework the new pool into TransactionPool and Pool impls
* rework pool to store pool entries
with associated timer and source etc.
* all_transactions
* extra_txs so we can validate stempool against existing txpool
* rework reconcile_block
* txhashset apply_raw_tx can now rewind to a checkpoint (prev raw tx)
* wip - txhashset tx tests
* more flexible rewind on MMRs
* add tests to cover apply_raw_txs on txhashset extension
* add_to_stempool and add_to_txpool
* deaggregate multi kernel tx when adding to txpoool
* handle freshness in stempool
handle propagation of stempool txs via dandelion monitor
* patience timer and fluff if we cannot propagate
to next relay
* aggregate and fluff stempool is we have no relay
* refactor coinbase maturity
* rewrote basic tx pool tests to use a real txhashset via chain adapter
* rework dandelion monitor to reflect recent discussion
works locally but needs a cleanup
* refactor dandelion_monitor - split out phases
* more pool test coverage
* remove old test code from pool (still wip)
* block_building and block_reconciliation tests
* tracked down chain test failure...
* fix test_coinbase_maturity
* dandelion_monitor now runs...
* refactor dandelion config, shared across p2p and pool components
* fix pool tests with new config
* fix p2p tests
* rework tx pool to deal with duplicate commitments (testnet2 limitation)
* cleanup and address some PR feedback
* add big comment about pre_tx...
* documentation and spelling
* unused values in tests; just .unwrap()
* unneeded macro_use (router)
* unneeded macro_use and use-imports
* unused value -> .unwrap
* unused variables
* clarify that " is required (see 107ea3c4dd)
* first steps to dig into #933 test_p2p issues
* less simulnet build warnings
* Added additional message type size limits
* Externalize sync loop state, check if we received all
* Adjusted some message sizes, log error when too short
* 4x limits to give ourselves more space
* No need for sync to wait if we have enough peers.
* Tolerate a few less headers before considering we got them all.
* Fix and cleanup of fast sync triggering logic
* New txhashset on fast sync has to be applied, not rolled back
* Do not block if peer send buffer is full, fixes#912
* add hint for gcc-5 for building CUDA plugin
* add N_BLOCks comment for >=6GB GPU cards
* minor logging cleanup
* mark to be kept + reformat as "@ height [hash]"
* show CuckooNN + better wording
* Bump up crates versions
* Finally add a Cargo.lock to avoid dependency breakages
* Build doc update for testnet2
* Fix test framework not really using its mining config
* Testnet2 genesis, best so far at 128 difficulty (a nice number)
* Minor build doc update
* move some debug! to trace!
* more informative debugs
* standardising on always showing chain tips as "cumulative difficulty @ height [hash]"
* make 2 debug outputs into a single
* "no peers" as warning (not info) to let it stand out more clearly
* move fn param (used only in this one debug line)
* clarify difficulty "units"
* adding appropriate message to bulletproofs to allow for restore
* rustfmt
* should work, now test
* rustfmt
* fix to wallet restore, works now
* fix pool tests
* fix pool tests
* rustfmt
* Initial Dandelion Commit
* Changed stem_tx_pool to tx_stempool
* Introduction of stem memory pool and stem pool config
* Pool push now send to stem memory pool
* Add stem transaction functions
* Add stem transaction pool
* Drastically simplified code structure
* Add monitor transactions
* Add Dandelion monitor and remove transactions from stempool
* Add peer relay monitor
* Reconcile block with stempool
* Fix total size bug
* Add fluff option for pool push
* Added details on dandelion monitor
* Fix issue with missing parent
* Child transaction with stempool parent are now forced stem
* Update Dandelion Relay from outgoing peers
* Fix missing pool reconciliation
* Add the ability to fluff a transaction directly
* Fix tests for Dandelion
* Missing send_stem_transaction method...
* Add fluff handler for wallet
* Add logger when successfully updated Dandelion relay
* Launch transaction monitor last
* Fix dandelion relay misplaced
* Add logging and updating for stempool
* Additionnal check for stem transaction
* Fix 2 Locks in a row
* first explorations at attempting to integrate more user-friendly status screen/ui
* rustfmt
* adding some logo and color for visual interest
* formatting
* better integration with stdout, cleaner looking startup and shutdown
* rustfmt
* update to framework, and first collection of stats from server
* rustfmt
* commit of basic stat screen, think it's in a good enough state to share
* rustfmt
* fix to automated tests
* fix to automated tests
* grin.toml setting
* grin.toml setting
* grin.toml setting
* merge from upstream
* merge from upstream
* merging
* merging
* formatting
* adding more status screens, beginning to collect peer data
* rustfmt
* beginnings of peer info
* adding tui dir
* rustfmt
* missing table
* create title bar
* Split up UI elements into separate files, create trait for update
* Added basic mining view
* wip - basic tx pool lookup for kernel short ids (compact block hydration)
* use the nonce in the compact_block to correctly generate short_ids for lookup
* query the tx pool based on kernel short_ids
* tests passing
* cleanup some logging
* cleanup logging
* Clean server shutdown, generalizes usage of `Weak`. Introduces 2 main changes:
* A shared `AtomicBool` that signals server shutdown. All server
threads regularly check it to break out of their main loops when
it changes to `true`.
* Breaking of circular `Arc` references, which can never be
destroyed, by downgrading to `Weak` instead. Only the main server
keeps the `Arc` while all other components get the `Weak` variant.
Both of these are required for all long-living structs to be
cleanly destroyed. Note that in Rust this is fairly important as
most resource-freeing logic is associated with `drop`,
which is only called when said struct is free of scope or `Arc`
references.
Should address most of #536 (only need the stop hook to call
`Server` shutdown).
* Test for fast sync, followed by restart, followed by re-fast-sync
* P2P test fix
* Double sync taking too long for Travis, commenting out for now
* Util to zip and unzip directories
* First pass at sumtree request/response. Add message types, implement the exchange in the protocol, zip up the sumtree directory and stream the file over, with necessary adapter hooks.
* Implement the sumtree archive receive logicGets the sumtree archive data stream from the network and write it to a file. Unzip the file, place it at the right spot and reconstruct the sumtree data structure, rewinding where to the right spot.
* Sumtree hash structure validation
* Simplify sumtree backend buffering logic. The backend for a sumtree has to implement some in-memory buffering logic to provide a commit/rollback interface. The backend itself is an aggregate of 3 underlying storages (an append only file, a remove log and a skip list). The buffering was previously implemented both by the backend and some of the underlying storages. Now pushing back all buffering logic to the storages to keep the backend simpler.
* Add kernel append only store file to sumtrees. The chain sumtrees structure now also saves all kernels to a dedicated file. As that storage is implemented by the append only file wrapper, it's also rewind-aware.
* Full state validation. Checks that:
- MMRs are sane (hash and sum each node)
- Tree roots match the corresponding header
- Kernel signatures are valid
- Sum of all kernel excesses equals the sum of UTXO commitments
minus the supply
* Fast sync handoff to body sync. Once the fast-sync state is fully setup, get bacj in body sync
mode to get the full bodies of the last blocks we're missing.
* First fully working fast sync
* Facility in p2p conn to deal with attachments (raw binary after message).
* Re-introduced sumtree send and receive message handling using the above.
* Fixed test and finished updating all required db state after sumtree validation.
* Massaged a little bit the pipeline orphan check to still work after the new sumtrees have been setup.
* Various cleanup. Consolidated fast sync and full sync into a single function as they're very similar. Proper conditions to trigger a sumtree request and some checks on receiving it.
* Re-introduce peer regular ping/pong
* Fix partial header reads. Turns out that on async tcp streams, even a small chunk like a
header can be read partially. So header read needs to rely on our
fixed-up `read_exact`, with an additional boolean to allow yield
when no bytes were read.
* First tests for API handlers
* Test chain UTXO handler
* Add test sumtrees handlers
* Fix typo
* Removed unused logger
* Update bitflags to ^1.0
* Missing test for bitflags update
* Moved test to grin directory
* Remove tests dependencies
* Add API P2P tests
* Fix hex string commitment
* Fix conflicting port
* Fix directory conflict and server port
* Wait for at least one block is mined on Travis
* first pass at allow/deny lists for hard-coded peers (not just seeds)
* commit
* add peers_allow and peers_deny examples and comments to grin.toml
* always ask for compact block
always fail to hydrate
always fallback to requesting full block
* decide to send full (empty) block over compact (empty) block
* add some randomness to the decision around broadcasting an empty block
as a block or as a compact block (so we can exercise more code paths easily)
* first pass at allow/deny lists for hard-coded peers (not just seeds)
* commit
* add peers_allow and peers_deny examples and comments to grin.toml
* fix build issue with simulnet tests
* fix p2p tests
* [wip] header first propagation
successfully propagating headers (unless we mined the block itself)
not yet asking for the block if we receive a header
* call request_block after successful processing header
* cleanup and skip asking for block if header is an orphan
* comments around error handling in receive_header
* Tried but failed to fix `cargo build` complaint about unused #[macro use]. See also 7a803a8dc1
* Compiler complaints be-gone
* Give sumtree tests method-tagged folder names so they don't overwrite each others' files
Fixes#658
* Making initial sync easier on the eyes:
- display "chain pointers" as: cumulative @ height [hash]
- clarify and line up to make the "pointers" easy to compare
- make every 100th block show info on debug level info, else as before
* Change name of get_peer to get_connected_peer and add a get_peer method with store
* Change to get_connected_peer
* Added handler for GET peers/a.b.c.d
