* Ban on cannot get block header in txhashset_write
* Rusfmt
* Fix typo
* Missing error handling
* Rustfmt
* Only accept txhashset from corresponding peer
* Switch to AtomicBool instead of RwLock<bool>
* Rustfmt
* introduce protocol version to deserialize and read
* thread protocol version through our reader
* cleanup
* cleanup
* streaming_reader cleanup
* Pass protocol version into BinWriter to allow for version specific serialization rules.
* rustfmt
* read and write now protocol version specific
* introduce protocol version to deserialize and read
* thread protocol version through our reader
* example protocol version access in kernel read
* fix our StreamingReader impl (WouldBlock woes)
* debug log progress of txhashset download
I made an suboptimal (aka stupid) decision to stop and wait for peers
one by one which makes shutdown very slow - O(n). This PR decouples sending
stop signal from waiting a thread to exit. On top of it in Peers we
first send stop signal to all peers and only after that start waiting
for them to exit. It gives us a constant time of shutdown in most of the
cases.
* connection no longer wrapped in an Option in peer
* introduce peer.send()
* remove some Arc indirection
* self.send() cleanup
* extract Peer:new() from connect and accept
* fixup
* cleanup
It turns out that we drop connection if we fail to process a message
because of chain/store/internal error, eg we have a header already, so
we refuse it and drop the peer.
This pr doesn't forward this error to the peer error channel so the
connection will not be dropped.
* use a grin specific tmp dir instead of a system tmp dir
* rustfmt
* using create_new instead of create
* switch the txhashset sandbox from system tmp dir to grin specific tmp dir
* rustfmt
* adapter get_tmp_dir delegate to chain implementation
* simply the logic of protolc for get_tmpfile_pathname
* rustfmt
* fix the merge mistake
Most of the methods return nothing or bool which is used to decide if a
sender of a message should be banned or not. However underlying chain
implementation may fail so we need a way to reflect this fact in API.
Also it allows to reduce number of unwraps and makes the code more robust.
* cleanup legacy "3 dot" check (#2625)
* Allow to peers behind NAT to get up to preferred_max connections (#2543)
Allow to peers behind NAT to get up to preffered_max connections
If peer has only outbound connections it's mot likely behind NAT and we should not stop it from getting more outbound connections
* Reduce usage of unwrap in p2p crate (#2627)
Also change store crate a bit
* Simplify (and fix) output_pos cleanup during chain compaction (#2609)
* expose leaf pos iterator
use it for various things in txhashset when iterating over outputs
* fix
* cleanup
* rebuild output_pos index (and clear it out first) when compacting the chain
* fixup tests
* refactor to match on (output, proof) tuple
* add comments to compact() to explain what is going on.
* get rid of some boxing around the leaf_set iterator
* cleanup
* [docs] Add switch commitment documentation (#2526)
* remove references to no-longer existing switch commitment hash
(as switch commitments were removed in ca8447f3bd
and moved into the blinding factor of the Pedersen Commitment)
* some rewording (points vs curves) and fix of small formatting issues
* Add switch commitment documentation
* [docs] Documents in grin repo had translated in Korean. (#2604)
* Start to M/W intro translate in Korean
* translate in Korean
* add korean translation on intro
* table_of_content.md translate in Korean.
* table_of_content_KR.md finish translate in Korean, start to translate State_KR.md
* add state_KR.md & commit some translation in State_KR.md
* WIP stat_KR.md translation
* add build_KR.md && stratum_KR.md
* finish translate stratum_KR.md & table_of_content_KR.md
* rename intro.KR.md to intro_KR.md
* add intro_KR.md file path each language's intro.md
* add Korean translation file path to stratum.md & table_of_contents.md
* fix difference with grin/master
* Fix TxHashSet file filter for Windows. (#2641)
* Fix TxHashSet file filter for Windows.
* rustfmt
* Updating regexp
* Adding in test case
* Display the current download rate rather than the average when syncing the chain (#2633)
* When syncing the chain, calculate the displayed download speed using the current rate from the most recent iteration, rather than the average download speed from the entire syncing process.
* Replace the explicitly ignored variables in the pattern with an implicit ignore
* remove root = true from editorconfig (#2655)
* Add Medium post to intro (#2654)
Spoke to @yeastplume who agreed it makes sense to add the "Grin Transactions Explained, Step-by-Step" Medium post to intro.md
Open for suggestions on a better location.
* add a new configure item for log_max_files (#2601)
* add a new configure item for log_max_files
* rustfmt
* use a constant instead of multiple 32
* rustfmt
* Fix the build warning of deprecated trim_right_matches (#2662)
* [DOC] state.md, build.md and chain directory documents translate in Korean. (#2649)
* add md files for translation.
* start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md
* add dandelion_KR.md && simulation_KR.md for Korean translation.
* add md files for translation.
* start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md
* add dandelion_KR.md && simulation_KR.md for Korean translation.
* remove some useless md files for translation. this is rearrange set up translation order.
* add dot end of sentence & translate build.md in korean
* remove fast-sync_KR.md
* finish build_KR.md translation
* finish build_KR.md translation
* finish translation state_KR.md & add phrase in state.md to move other language md file
* translate blocks_and_headers.md && chain_sync.md in Korean
* add . in chain_sync.md , translation finished in doc/chain dir.
* fix some miss typos
* Api documentation fixes (#2646)
* Fix the API documentation for Chain Validate (v1/chain/validate). It was documented as a POST, but it is actually a GET request, which can be seen in its handler ChainValidationHandler
* Update the API V1 route list response to include the headers and merkleproof routes. Also clarify that for the chain/outputs route you must specify either byids or byheight to select outputs.
* refactor(ci): reorganize CI related code (#2658)
Break-down the CI related code into smaller more maintainable pieces.
* Specify grin or nanogrins in API docs where applicable (#2642)
* Set Content-Type in API client (#2680)
* Reduce number of unwraps in chain crate (#2679)
* fix: the restart of state sync doesn't work sometimes (#2687)
* let check_txhashset_needed return true on abnormal case (#2684)
* Reduce number of unwwaps in api crate (#2681)
* Reduce number of unwwaps in api crate
* Format use section
* Small QoL improvements for wallet developers (#2651)
* Small changes for wallet devs
* Move create_nonce into Keychain trait
* Replace match by map_err
* Add flag to Slate to skip fee check
* Fix secp dependency
* Remove check_fee flag in Slate
* Add Japanese edition of build.md (#2697)
* catch the panic to avoid peer thread quit early (#2686)
* catch the panic to avoid peer thread quit before taking the chance to ban
* move catch wrapper logic down into the util crate
* log the panic info
* keep txhashset.rs untouched
* remove a warning
* [DOC] dandelion.md, simulation.md ,fast-sync.md and pruning.md documents translate in Korean. (#2678)
* Show response code in API client error message (#2683)
It's hard to investigate what happens when an API client error is
printed out
* Add some better logging for get_outputs_by_id failure states (#2705)
* Switch commitment doc fixes (#2645)
Fix some typos and remove the use of parentheses in a
couple of places to make the reading flow a bit better.
* docs: update/add new README.md badges (#2708)
Replace existing badges with SVG counterparts and add a bunch of new ones.
* Update intro.md (#2702)
Add mention of censoring attack prevented by range proofs
* use sandbox folder for txhashset validation on state sync (#2685)
* use sandbox folder for txhashset validation on state sync
* rustfmt
* use temp directory as the sandbox instead actual db_root txhashset dir
* rustfmt
* move txhashset overwrite to the end of full validation
* fix travis-ci test
* rustfmt
* fix: hashset have 2 folders including txhashset and header
* rustfmt
*
(1)switch to rebuild_header_mmr instead of copy the sandbox header mmr
(2)lock txhashset when overwriting and opening and rebuild
* minor improve on sandbox_dir
* add Japanese edition of state.md (#2703)
* Attempt to fix broken TUI locale (#2713)
Can confirm that on the same machine 1.0.2 TUI looks great and is broken on
the current master. Bump of `cursive` version fixed it for me.
Fixes#2676
* clean the header folder in sandbox (#2716)
* forgot to clean the header folder in sandbox in #2685
* Reduce number of unwraps in servers crate (#2707)
It doesn't include stratum server which is sufficiently changed in 1.1
branch and adapters, which is big enough for a separate PR.
* rustfmt
* change version to beta
* reworked the dandelion rewrite (dandelion++)
* fallback to fluff/broadcast if we cannot stem the tx for any reason
* rework stem vs fluff logic during accepting tx
* cleanup docs
* add is_stem to logging
* cleanup
* rustfmt
* cleanup monitor and logging
* rework dandelion monitor to use simple cutoff for aggregation
* transition to next epoch *after* processing tx
so we fluff final outstanding txs
* fluff all txs in stempool if any are older than 30s
aggressively aggregate when we can
* fix rebase onto 1.1.0
* default config comments for Dandelion
* fix code to reflect our tests - fallback to txpool on stempool error
* log fluff and expire errors in dandelion monitor
* cleanup
* fix off by one
* cleanup
* cleanup
* various fixes
* one less clone
* cleanup
* wip
* big refactor, regretting doing this now
* PeerAddr everywhere
* cleanup
* fixup server tests
* peers api working for GET, POST is still WIP
* we can now ban/unban peers by ip only (port optional)
* shutdown the tcpstream when peer connect or accept fail
* remove the unnecessary 3 times retry on peer connecting
* connect/accept are actually handshakings instead of tcpstream connect/accept
* Replace logging backend to flexi-logger and add log rotation
* Changed flexi_logger to log4rs
* Disable logging level filtering in Root logger
* Support different logging levels for file and stdout
* Don't log messages from modules other than Grin-related
* Fix formatting
* Place backed up compressed log copies into log file directory
* Increase default log file size to 16 MiB
* Add comment to config file on log_max_size option
* Add peers used bandwidth calculation and display in TUI
* Fix formatting
* Change Mutex to RwLock from peer's used bandwidth statistics in Tracker
* Make used bandwidth column in TUI peers list sort by sum of bytes
* get rid of RwLock around peer instances
* rustfmt
* rename stuff to live_info
* rustfmt
* serialize into PeerInfoDisplay
limit live_info write lock to peer_info.update()
rename to PeerLiveInfo
* simplify broadcast logic a bit more
connected peers are connected by definition
* return true/false on broadcast so we can send to more peers
* rustfmt
* fix p2p and server tests for PeerInfoDisplay
* commit
* Move Proof and Difficulty types to pow module. Difficulty scaling calculation.
* Diffculty scaling and size shift for 2nd PoW
* Backport e7eb26ee
* Test compilation fixes
* Scaling only need to go one way, as @tromp pointed out
