* Add check for p2p connection limits
* Simplify undesirable connection shutdown
* Make inbound and outbound connections more explicit
* Cleanup inbound and outbound connections
* Cleanup an outbound peers check
* Rename healthy_peers_mix to enough_outbound_peers
* be a lot less restrictive when picking some candidate peers to connect to
keep the peer address queue drained but actually attempt a healthy number of connections
as most of these attempts are going to fail due to majority of nodes not being publicly accessible
* always stem local txs if configured that way (unless explicitly fluff from wallet)
this overrides current epoch behavior for txs coming in via "push-api"
rename "local" to "our" txs
* TxSource is now an enum for type safety.
* cleanup legacy "3 dot" check (#2625)
* Allow to peers behind NAT to get up to preferred_max connections (#2543)
Allow to peers behind NAT to get up to preffered_max connections
If peer has only outbound connections it's mot likely behind NAT and we should not stop it from getting more outbound connections
* Reduce usage of unwrap in p2p crate (#2627)
Also change store crate a bit
* Simplify (and fix) output_pos cleanup during chain compaction (#2609)
* expose leaf pos iterator
use it for various things in txhashset when iterating over outputs
* fix
* cleanup
* rebuild output_pos index (and clear it out first) when compacting the chain
* fixup tests
* refactor to match on (output, proof) tuple
* add comments to compact() to explain what is going on.
* get rid of some boxing around the leaf_set iterator
* cleanup
* [docs] Add switch commitment documentation (#2526)
* remove references to no-longer existing switch commitment hash
(as switch commitments were removed in ca8447f3bd
and moved into the blinding factor of the Pedersen Commitment)
* some rewording (points vs curves) and fix of small formatting issues
* Add switch commitment documentation
* [docs] Documents in grin repo had translated in Korean. (#2604)
* Start to M/W intro translate in Korean
* translate in Korean
* add korean translation on intro
* table_of_content.md translate in Korean.
* table_of_content_KR.md finish translate in Korean, start to translate State_KR.md
* add state_KR.md & commit some translation in State_KR.md
* WIP stat_KR.md translation
* add build_KR.md && stratum_KR.md
* finish translate stratum_KR.md & table_of_content_KR.md
* rename intro.KR.md to intro_KR.md
* add intro_KR.md file path each language's intro.md
* add Korean translation file path to stratum.md & table_of_contents.md
* fix difference with grin/master
* Fix TxHashSet file filter for Windows. (#2641)
* Fix TxHashSet file filter for Windows.
* rustfmt
* Updating regexp
* Adding in test case
* Display the current download rate rather than the average when syncing the chain (#2633)
* When syncing the chain, calculate the displayed download speed using the current rate from the most recent iteration, rather than the average download speed from the entire syncing process.
* Replace the explicitly ignored variables in the pattern with an implicit ignore
* remove root = true from editorconfig (#2655)
* Add Medium post to intro (#2654)
Spoke to @yeastplume who agreed it makes sense to add the "Grin Transactions Explained, Step-by-Step" Medium post to intro.md
Open for suggestions on a better location.
* add a new configure item for log_max_files (#2601)
* add a new configure item for log_max_files
* rustfmt
* use a constant instead of multiple 32
* rustfmt
* Fix the build warning of deprecated trim_right_matches (#2662)
* [DOC] state.md, build.md and chain directory documents translate in Korean. (#2649)
* add md files for translation.
* start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md
* add dandelion_KR.md && simulation_KR.md for Korean translation.
* add md files for translation.
* start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md
* add dandelion_KR.md && simulation_KR.md for Korean translation.
* remove some useless md files for translation. this is rearrange set up translation order.
* add dot end of sentence & translate build.md in korean
* remove fast-sync_KR.md
* finish build_KR.md translation
* finish build_KR.md translation
* finish translation state_KR.md & add phrase in state.md to move other language md file
* translate blocks_and_headers.md && chain_sync.md in Korean
* add . in chain_sync.md , translation finished in doc/chain dir.
* fix some miss typos
* Api documentation fixes (#2646)
* Fix the API documentation for Chain Validate (v1/chain/validate). It was documented as a POST, but it is actually a GET request, which can be seen in its handler ChainValidationHandler
* Update the API V1 route list response to include the headers and merkleproof routes. Also clarify that for the chain/outputs route you must specify either byids or byheight to select outputs.
* refactor(ci): reorganize CI related code (#2658)
Break-down the CI related code into smaller more maintainable pieces.
* Specify grin or nanogrins in API docs where applicable (#2642)
* Set Content-Type in API client (#2680)
* Reduce number of unwraps in chain crate (#2679)
* fix: the restart of state sync doesn't work sometimes (#2687)
* let check_txhashset_needed return true on abnormal case (#2684)
* Reduce number of unwwaps in api crate (#2681)
* Reduce number of unwwaps in api crate
* Format use section
* Small QoL improvements for wallet developers (#2651)
* Small changes for wallet devs
* Move create_nonce into Keychain trait
* Replace match by map_err
* Add flag to Slate to skip fee check
* Fix secp dependency
* Remove check_fee flag in Slate
* Add Japanese edition of build.md (#2697)
* catch the panic to avoid peer thread quit early (#2686)
* catch the panic to avoid peer thread quit before taking the chance to ban
* move catch wrapper logic down into the util crate
* log the panic info
* keep txhashset.rs untouched
* remove a warning
* [DOC] dandelion.md, simulation.md ,fast-sync.md and pruning.md documents translate in Korean. (#2678)
* Show response code in API client error message (#2683)
It's hard to investigate what happens when an API client error is
printed out
* Add some better logging for get_outputs_by_id failure states (#2705)
* Switch commitment doc fixes (#2645)
Fix some typos and remove the use of parentheses in a
couple of places to make the reading flow a bit better.
* docs: update/add new README.md badges (#2708)
Replace existing badges with SVG counterparts and add a bunch of new ones.
* Update intro.md (#2702)
Add mention of censoring attack prevented by range proofs
* use sandbox folder for txhashset validation on state sync (#2685)
* use sandbox folder for txhashset validation on state sync
* rustfmt
* use temp directory as the sandbox instead actual db_root txhashset dir
* rustfmt
* move txhashset overwrite to the end of full validation
* fix travis-ci test
* rustfmt
* fix: hashset have 2 folders including txhashset and header
* rustfmt
*
(1)switch to rebuild_header_mmr instead of copy the sandbox header mmr
(2)lock txhashset when overwriting and opening and rebuild
* minor improve on sandbox_dir
* add Japanese edition of state.md (#2703)
* Attempt to fix broken TUI locale (#2713)
Can confirm that on the same machine 1.0.2 TUI looks great and is broken on
the current master. Bump of `cursive` version fixed it for me.
Fixes#2676
* clean the header folder in sandbox (#2716)
* forgot to clean the header folder in sandbox in #2685
* Reduce number of unwraps in servers crate (#2707)
It doesn't include stratum server which is sufficiently changed in 1.1
branch and adapters, which is big enough for a separate PR.
* rustfmt
* change version to beta
* reworked the dandelion rewrite (dandelion++)
* fallback to fluff/broadcast if we cannot stem the tx for any reason
* rework stem vs fluff logic during accepting tx
* cleanup docs
* add is_stem to logging
* cleanup
* rustfmt
* cleanup monitor and logging
* rework dandelion monitor to use simple cutoff for aggregation
* transition to next epoch *after* processing tx
so we fluff final outstanding txs
* fluff all txs in stempool if any are older than 30s
aggressively aggregate when we can
* fix rebase onto 1.1.0
* default config comments for Dandelion
* fix code to reflect our tests - fallback to txpool on stempool error
* log fluff and expire errors in dandelion monitor
* cleanup
* fix off by one
* cleanup
* cleanup
* various fixes
* one less clone
* cleanup
* Only update outputs with unconfirmed transactions outstanding
* add further check for Unspent output that have been spent to check_repair
* rename to
* make updating all outputs optional API parameter. do full update before a wallet check, remove unspent->spent check from check process
* rustfmt
* typo
* add recover from phrase option to init
* rustfmt
* don't panic if recover is cancelled, grin-wallet.toml is created but wallet_data dir doesn't yet exits
* rustfmt
* Fix secondary scaling bugs; rename is_testnet -> is_floonet (#2215)
* add global::is_mainnet()
* use it to change pre-genesis pow type
* rename is_testnet -> is_floonet
* Support multiple chain configurations (#2217)
* Support multiple chain configurations
Supports generating the proper configuration for each chain type
(mainnet, floonet, usernet). Will run them by default under
their respective root directory (~/.grin/main, ~/.grin/floo, etc).
Assigned default ports for mainnet, overriding them to keep Floonet
ports unchanged.
For now, starting on mainnet will abort.
* Fixed usernet command line help message. Fixes#2217
* Differing magic numbers for each chain type (#2208)
* stick to e=H(R|P|m) when use schnorr signature (#2200)
* stick to e=H(R|P|m) when use schnorr signature
* (1)add verify_slate_messages for wallet receive (2)log the message content
* remove debug log on verify_slate_messages
* verify the sender's message signature when receive_tx in wallet listen
* Revert "remove debug log on verify_slate_messages"
This reverts commit 65ea32a407.
* Revert "rustfmt"
This reverts commit c380ab9185.
* Revert "(1)add verify_slate_messages for wallet receive (2)log the message content"
This reverts commit 9584ca7a89.
* [re-floonet] Keychain Floonet BIP32 version/network option (#2235)
* add 'is_floonet' property to keychain
* fix hex encoding and tests
* Fix couple floonet loose ends (#2230)
* Fix couple floonet loose ends. Fixes#2216
* Doc fix for sig message
* Refuse unkown kernel features (#2244)
* Minor: magic number change for re-floonet
* Set pre genesis is_secondary to true (#2247)
* Minor: tx validation error display underlying
* New floonet genesis
* genesis rustfmt
* Use chain-specific config for wallet toml gen
* Fix default wallet_listener_url
* New more reasonable genesis block, bumped version
* genesis rustfmt
* Couple minor fixes to genesis generation script
* keybase notification on transaction received
* fix: use 'keybase status' to get own username
* refactor the code
* security enhancement for multiple recipients
* change the poll interval from 5s to 1s
* log the error message of keybase api
* replace cyan and yellow which not easy to read on white background
* wallet output color scheme configuration for terminal dark/white background
* use true for dark_background_color_scheme to make the default behavior same as before
* Update secp dependency to use crates.io version
* Add more details to various Cargo.toml
* Remove use of env variables that aren't reliably provided by cargo
* Replace logging backend to flexi-logger and add log rotation
* Changed flexi_logger to log4rs
* Disable logging level filtering in Root logger
* Support different logging levels for file and stdout
* Don't log messages from modules other than Grin-related
* Fix formatting
* Place backed up compressed log copies into log file directory
* Increase default log file size to 16 MiB
* Add comment to config file on log_max_size option
Mostly to support let's encrypt. It requires to switch from native-tls and friends to rustls and friends, which perhap is a good thing per se, rustls looks more modern and for sure more Rusty.
Alternative would be manually convert pkcs12 certificates to pem, which requires openssl tools to be installed and make transparent integration whith let's encrypt much harder (this is out of the scope for now, perhaps in near future)
* Allow TLS for Wallet APIs
This PR adds an optional support of TLS for wallet APIs. Only PKCS12 format is supported, will address .pem support in next PR and provide some documentation.
Address #1425
* Add api_secret
* Add to base64 method
* Add basic auth in API
* Add Basic Auth to owner API
* Add flag to enable disable basic auth
* Add .api_secret file
* config file can now be generated by executable
* rustfmt
* remove now-unnecessary config defaults test
* set up paths and config file creation in user's home directory
* rustfmt
* remove default grin.toml
* add grin configuration command to spit out config file
* Split configuration into wallet and server
* rustfmt
* Restore logging to wallet configurations
* rustfmt
* Sort pool tx by fee over weight for mining. Fixes#1105
* Bucketing dependent transactions before weighing. Minor tx weight fixes.
* Limit length of tx chain, cleanup and test fixes
* Cleanup all mining references to a hardcoded tx count
* Small test improvement, cleanup
* Make grin.toml config optional. Mirror exisiting config parameters in grin.toml to source code, so binary can run without a config file. Add test for it.
* fixup! Make grin.toml config optional
* Beginning to remove in-process miner
* rustfmt
* rustfmt
* rustfmt
* rustfmt
* remove pow crate and put remnants into core
* rustfmt
* fix test compilation in core and chain
* rustfmt
* Updating server tests to use test miner
* rustfmt
* rustfmt
* remove pow from test matrix
* adding basic stratum stats to TUI
* run stratum server at all times, and halt messages while syncing
* fix core tests
* add ability to run internal test miner for cuckoo 16 testing
* modify build instructions
* Bump up crates versions
* Finally add a Cargo.lock to avoid dependency breakages
* Build doc update for testnet2
* Fix test framework not really using its mining config
* Testnet2 genesis, best so far at 128 difficulty (a nice number)
* Minor build doc update
* Util to zip and unzip directories
* First pass at sumtree request/response. Add message types, implement the exchange in the protocol, zip up the sumtree directory and stream the file over, with necessary adapter hooks.
* Implement the sumtree archive receive logicGets the sumtree archive data stream from the network and write it to a file. Unzip the file, place it at the right spot and reconstruct the sumtree data structure, rewinding where to the right spot.
* Sumtree hash structure validation
* Simplify sumtree backend buffering logic. The backend for a sumtree has to implement some in-memory buffering logic to provide a commit/rollback interface. The backend itself is an aggregate of 3 underlying storages (an append only file, a remove log and a skip list). The buffering was previously implemented both by the backend and some of the underlying storages. Now pushing back all buffering logic to the storages to keep the backend simpler.
* Add kernel append only store file to sumtrees. The chain sumtrees structure now also saves all kernels to a dedicated file. As that storage is implemented by the append only file wrapper, it's also rewind-aware.
* Full state validation. Checks that:
- MMRs are sane (hash and sum each node)
- Tree roots match the corresponding header
- Kernel signatures are valid
- Sum of all kernel excesses equals the sum of UTXO commitments
minus the supply
* Fast sync handoff to body sync. Once the fast-sync state is fully setup, get bacj in body sync
mode to get the full bodies of the last blocks we're missing.
* First fully working fast sync
* Facility in p2p conn to deal with attachments (raw binary after message).
* Re-introduced sumtree send and receive message handling using the above.
* Fixed test and finished updating all required db state after sumtree validation.
* Massaged a little bit the pipeline orphan check to still work after the new sumtrees have been setup.
* Various cleanup. Consolidated fast sync and full sync into a single function as they're very similar. Proper conditions to trigger a sumtree request and some checks on receiving it.
* Very quick peer banning endpoint, helps with #406
* Ping heights (#407)
* add height to ping/ping
* reformat output
* fix p2p test
* Fix orphan handling, not related to current head. Fixes#412
* Check before borrow, fixes#267
* Not finding an output commit in pos is an AlreadySpent
* Fix race condition, sending before conn is ready
* Explicit error for unknown pos of a forked block
* Remove config outdated tests. Fix#333
* Check ref and try before borrow, fix#400
* We do not want to sync with old peers anyway
* Hide cargo compiler warning for unused NoopAdapter and unused test code. Add TODOs
Wallet configuration was disabled presumably as wallet is its
own separate process. However people seem to still want to use
a single config for everything, which may be a sign that the
lifecycle of the wallet and the server should be the same by
default (with appropriate options to only start one).
Note that this does *not* mean that the wallet and the server
should share the same process. The wallet process can easily be
forked. But sharing the same config file may provide a lot of
future convenience.
Moved the HTTP APIs away from the REST endpoint abstraction and
to simpler Hyper handlers. Re-established all routes as v1.
Changed wallet receiver port to 13415 to avoid a gap in port
numbers.
Finally, rustfmt seems to have ignored specific files arguments,
running on everything.
* added global slog instance, changed all logging macro formats to include logger instance
* adding configuration to logging, allowing for multiple log outputs
* updates to test, changes to build docs
* rustfmt
* moving logging functions into util crate
* Adding ability to load multiple mining plugins in parallel via cuckoo miner
* updating with newest cuckoo-miner changes
* revert default config value
* update pow document with link to podcast
* Adding output stats from plugin, when available
* adding grin config
* moving pow crate from core/pow to it's own crate
* moving POW/mining stuff into pow module, and removing mining dependency from chain
* refactored most of mining into pow module...miner.rs still in server
* update grin tests
* updating genesis block mining to use configured miner, if available
* chain tests back into chain, done with pow refactor
* use tag of cuckoo-miner for pr
* minor cleanup - unused imports
* cleanup build warnings - unused vars
* make structs pub to get rid of the private_in_public lint warning
* missing docs on RangeProof
* add missing docs to store delete function
* cleaned up deprecation warning -
tokio_core -> tokio_io
complete() -> send()
* Adding cuckoo-miner into grin as a proper dependency now
* Defaulting to using cuckoo-miner
* Updates to tests to use cuckoo_miner by default, (using cuckoo16)
* addition of configuration file to grin executable, instructions on how it's picked up are in grin.toml
* Starting to add a configuration file, and change some elements of configuration structures to make them more consistent
